Concrete mixer operating precautions

Concrete mixer operating precautions

Concrete mixers may have all been seen, and its operation is not that simple. It would be better for us to take a look at them first, which will help your concrete mixer to work properly.
Here are the precautions for the operation of concrete mixers:
1. Before starting, the stirring lever should be placed in the “neutral” position.
2. After start-up, the stirring lever should be placed in the “unloading” position and the water in the cylinder should be drained.
3, before transport, discharge chute must be fixed in the "travel" position to prevent swinging.
4. When loading, the mixing rod should be placed in the "Loading" position.
5. When the person enters the barrel to clear the agglomeration, the vehicle shall be turned off, the key of the switch shall be removed, and the peripherals shall be monitored.
6, do a good job in civilized construction, the excess material in the barrel is not allowed to casually fall. After the unloading, the mixing drum, feed trough, idler and other parts must be cleaned.
7. Before starting, you should carefully check the various parts of the mechanical system and confirm that it can be started after confirming good conditions.
8. When operating the joystick, stop at the “neutral” position before moving to the next position.

Ei Core Lamination

The high quality CRNGO and CRGO steels we use have low iron loss and high magnetic permeability, product characteristics

It is the precision shearing machine to ensure that the lamination size is accurate and the burr is small. The magnetic properties of the material are restored by annealing in a nitrogen furnace. Available with single-phase and three-phase cores. EI cores are widely used in 50Hz transformers, current transformers, reactors, welding machines and distribution transformers.

Polish Stainless Steel Sheet,Thin Stainless Steel Sheet,Ei Silicon Steel Core Lamination

JIANGYIN CHUANGJIA ELECTRICAL CO.,LTD , https://www.siliconsteelcore.com