Kanpor AVR Double Bearing Fuan Fujian Brushless Alternator

KANPOR AVR Double Bearing FUAN FUJIAN Brushless Alternator



High Quality Three Phase Brushless 6.5kw-1000kw (Stamford STF series) Alternator

Stamford/Brushless Alternator /generator
Stamford Series three-phase A. C. Synchronous brushless generator impor, digest and absorb international advance technology of manufacturing electric machinery. It's the new-type designed and developed A. C. Synchronous generators by ourselves. The series generators accord with most of international standards. They alos accord with the following standards: International Electrician Command standard IEC 34 interntional standardization. Organization command standard ISO8528 NEMA Standard.
The products have outstanding performance, reliable quality, convenient maintenance. The generator and the engine can be connected with steel or flexible materialas a small-type generating station, it can be used in factories, buildings and worksites for lightening and electric power source.
 
standby power is the limit value of maximum output for emergency use.

Specifications
1) Brushless Synchronous A. C. Alternator,
2) Stamford Type of Electric Generator,
3) Three Phase, IP23, Class H,
4) Power range: 8kVA-1250kVA(6.5KW-1000KW)
5)Rated voltage 380/400V, 110-690V option
6) Adjusting rate of stable voltage≤ 1%
7) Transient state voltage≤ -15% - +20%
8) Wave aberration rate of voltage THD≤ 3%
9) Telephone harmony wave factor of telephone THF≤ 2%


Features
1) A. V. R. (Automatic Voltage Regulator)controlled
2) 12 wire reconnectable winding;
3) 100% famous brand copper wire;
4) 2/3pitch windings avoid excessive neutral currents;
5) Dynamically balanced rotor and sealed-for-life bearings;
6) Permanent Magnet Generator(PMG) is available as an option;
7) Reliable supplier with Quality Materials, and strict Quality Controller (by QC Dept. )
8) Easily coupled with power networks or other genetator sets,
9) Balance rotor with single or two sealed ball bearings available,
10) Convenient installation and easy maintenance, easy access to terminal, rotating rectifier and coupling bolts,
11) Wide range of flange adaptor and single bearing coupling disc,

Standards&Certifications
1) KANPOR STAMFORD CO.STF SERIES ALTERNATOR  are comformity to International standards of IECBS 5000, VDE 0530, IEC 34, NEMA MG1-22, CSA C22.2-100 and ASB59.
2) KANPOR STAMFORD CO.STF are Certified of CCC, TUV, EPA, SGS

Solutions
1) Easily coupled with Industrial&Marine, Diesel&Gasoline engines, world first-class of Cummins, Lovol, Volvo Penta, MTU, Deutz, MAN, Caterpillar, Yanmar, Kubota, Lister Petter, Doosan, etc,
2) Widely used in Industry, Commercial, real estate, hospital, hotel, railway, telecommunications, datacenters and mining etc

Warranty:
2 years, KANPOR STAMFORD CODHL new parts for replacement within 3 days upon customer's complaint.





★ FAQ

1.
Q.:What is your warranty period?

A.:Our warranty is 1 year or 1200 running hours whichever comes first. But based on some special project, we can extended our warranty period.

2.
Q.:Does your generator have global warranty?

A.:Yes, We kanpor genset supply the warranty.Also most of our products like Deutz,Cummins, Doosan,Yuchai,Weichai etc.power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.

3.
Q.:Can you accept OEM?

A.:Yes, we can accept OEM.

4.
Q.:What is your payment  terms?

A.:We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight.  But based on some special project and special order,we can do something on payment item.

5.
Q.:What is your delivery time?

A.:Our normal delivery time is 2 to 3 weeks. But if your order is using special engine and alternator, then the delivery time is longer.
 

What we do:

• Stamping of lamination
• Rotor die-casting
• Winding and inserting - both manual and semi-automatically
• Vacuum varnishing
• Machining shaft, housing, end shields, etc
• Rotor balancing
• Painting - both wet paint and powder coating
• assembly
• Packing
• Inspecting spare parts every processing
• 100% test after each process and final test before packing.  

  KANPOR AVR Double Bearing FUAN FUJIAN Brushless Alternator



High Quality Three Phase Brushless 6.5kw-1000kw (Stamford STF series) Alternator

Stamford/Brushless Alternator /generator
Stamford Series three-phase A. C. Synchronous brushless generator impor, digest and absorb international advance technology of manufacturing electric machinery. It's the new-type designed and developed A. C. Synchronous generators by ourselves. The series generators accord with most of international standards. They alos accord with the following standards: International Electrician Command standard IEC 34 interntional standardization. Organization command standard ISO8528 NEMA Standard.
The products have outstanding performance, reliable quality, convenient maintenance. The generator and the engine can be connected with steel or flexible materialas a small-type generating station, it can be used in factories, buildings and worksites for lightening and electric power source.
 
standby power is the limit value of maximum output for emergency use.

Specifications
1) Brushless Synchronous A. C. Alternator,
2) Stamford Type of Electric Generator,
3) Three Phase, IP23, Class H,
4) Power range: 8kVA-1250kVA(6.5KW-1000KW)
5)Rated voltage 380/400V, 110-690V option
6) Adjusting rate of stable voltage≤ 1%
7) Transient state voltage≤ -15% - +20%
8) Wave aberration rate of voltage THD≤ 3%
9) Telephone harmony wave factor of telephone THF≤ 2%


Features
1) A. V. R. (Automatic Voltage Regulator)controlled
2) 12 wire reconnectable winding;
3) 100% famous brand copper wire;
4) 2/3pitch windings avoid excessive neutral currents;
5) Dynamically balanced rotor and sealed-for-life bearings;
6) Permanent Magnet Generator(PMG) is available as an option;
7) Reliable supplier with Quality Materials, and strict Quality Controller (by QC Dept. )
8) Easily coupled with power networks or other genetator sets,
9) Balance rotor with single or two sealed ball bearings available,
10) Convenient installation and easy maintenance, easy access to terminal, rotating rectifier and coupling bolts,
11) Wide range of flange adaptor and single bearing coupling disc,

Standards&Certifications
1) KANPOR STAMFORD CO.STF SERIES ALTERNATOR  are comformity to International standards of IECBS 5000, VDE 0530, IEC 34, NEMA MG1-22, CSA C22.2-100 and ASB59.
2) KANPOR STAMFORD CO.STF are Certified of CCC, TUV, EPA, SGS

Solutions
1) Easily coupled with Industrial&Marine, Diesel&Gasoline engines, world first-class of Cummins, Lovol, Volvo Penta, MTU, Deutz, MAN, Caterpillar, Yanmar, Kubota, Lister Petter, Doosan, etc,
2) Widely used in Industry, Commercial, real estate, hospital, hotel, railway, telecommunications, datacenters and mining etc

Warranty:
2 years, KANPOR STAMFORD CODHL new parts for replacement within 3 days upon customer's complaint.





★ FAQ

1.
Q.:What is your warranty period?

A.:Our warranty is 1 year or 1200 running hours whichever comes first. But based on some special project, we can extended our warranty period.

2.
Q.:Does your generator have global warranty?

A.:Yes, We kanpor genset supply the warranty.Also most of our products like Deutz,Cummins, Doosan,Yuchai,Weichai etc.power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.

3.
Q.:Can you accept OEM?

A.:Yes, we can accept OEM.

4.
Q.:What is your payment  terms?

A.:We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight.  But based on some special project and special order,we can do something on payment item.

5.
Q.:What is your delivery time?

A.:Our normal delivery time is 2 to 3 weeks. But if your order is using special engine and alternator, then the delivery time is longer.
 

What we do:

• Stamping of lamination
• Rotor die-casting
• Winding and inserting - both manual and semi-automatically
• Vacuum varnishing
• Machining shaft, housing, end shields, etc
• Rotor balancing
• Painting - both wet paint and powder coating
• assembly
• Packing
• Inspecting spare parts every processing
• 100% test after each process and final test before packing.  

 

Glass Clamp

Glass Clamp,Glass Spigot Clamps,Glass Holding Clamp,Glass Bracket Clamp

DONGYING SHENGYU METAL PRODUCT CO.,LTD , https://www.sycastingprocess.com